OUR INDUSTRIAL WIRED SUB-METERING MASTER CONCENTRATOR, M-BUS MASTER-48

M-Bus Master-48 is engineered for commercial real estate towers, shopping malls, district heating networks, and industrial manufacturing plants. It powers and reads up to 48 standard M-Bus slave devices over a single robust two-wire cable bus.

Key Features & Architecture

48 M-Bus Slave Capacity

Drives and reads up to 48 standard slave unit loads (1.5mA each) over distances up to 2,000 meters.

Galvanic Bus Isolation

1.5kV optical and magnetic isolation protects connected meters and host controllers against ground loops.

Automated Short-Circuit Recovery

Detects bus over-current conditions instantly, shutting down output and auto-recovering when resolved.

Modbus RTU / TCP Gateway

Translates complex EN 13757 M-Bus telegrams into standard Modbus holding registers for PLC and BMS ingestion.

Compact 35mm DIN-Rail Form

Snaps directly into standard electrical distribution enclosures for rapid, clean installation.

Featuring intelligent short-circuit protection, galvanic isolation, and dual RS-485 / Ethernet interfaces, it enables building management systems (BMS) to capture water, gas, heat, and electrical sub-meter data without packet collisions.

M-Bus Master-48 Industrial Sub-Metering Concentrator

EN 13757 Architecture & Sub-Metering Protocol Translation

Commercial sub-metering environments often suffer from electrical motor noise and ground potential differences. M-Bus Master-48 provides ultra-stable 36V Mark / 24V Space signaling compliant with European EN 13757-2/3 standards.

Whether connecting thermal BTU meters, ultrasonic water meters, or multi-circuit electric sub-meters, M-Bus Master-48 handles automatic primary and secondary addressing, baud rate adaptation, and collision resolution.

  • 48 Standard M-Bus Slaves
  • EN 13757-2/3 Compliant
  • 2,000m Bus Cable Range
  • Modbus RTU / TCP Gateway
  • 1.5kV Galvanic Isolation
  • DIN-Rail Mount Form

A robust sub-metering backbone that eliminates wireless shielding problems in dense concrete risers and basement boiler rooms.

Sub-Metering Data Acquisition Workflow

STEP 01

Scheduled Bus Interrogation

M-Bus Master-48 queries each slave meter sequentially using calibrated EN 13757 request frames.

STEP 02

Telegram Parsing & Scaling

Multi-variable telegrams are extracted, decoded, and converted into floating-point energy engineering units.

STEP 03

BMS / Cloud Dispatch

Structured data registers are made immediately available to local PLCs and cloud energy accounting systems.

Sub-Metering Accuracy & Financial Impact

Operational Metrics & Parameters

  • Tenant Billing Dispute Rate: Reduced by 95%
  • Bus Communication Success Rate: 99.9% First-Pass
  • Maximum Bus Cable Length: 2,000 Meters
  • Data Collision Incidence: 0 Collisions (Polled Master)

Compatible Standards & Meter Types

Interoperable with all major European and international M-Bus instrumentation:

  • EN 13757-2 Physical Layer
  • EN 13757-3 Application Layer
  • Ultrasonic Water Meters
  • Thermal BTU Energy Meters
  • Modbus RTU RS-485
  • DIN-Rail Industrial Standard